FZ Long Life with Extra Lower Impedance
n Extra low impedance with temperature range -55℃ to +105℃ and load life of 2000~5000 hours.
n Impedance 5~25% less than KZ series.
u Specifications
Items |
Performance Characteristics |
Operating Temperature Range |
-55~+105℃ |
Voltage Range |
6.3~100V |
Capacitance Range |
3.3~4700μF |
Capacitance Tolerance |
±20% at 120 Hz, 20℃ |
Leakage Current |
For Φ4~Φ10, after 2 minutes’ application of rated voltage, leakage current is not more than 0.01CV or 3(μA), whichever is greater.
For Φ12.5~Φ16, after 1 minute’s application of rated voltage, leakage current is not more than 0.03CV or 4(μA), whichever is greater.。 |
Tan δ |
Measurement frequency: 120Hz, Temperature: 20℃
Rated voltage (V.DC) |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
80 |
100 |
Tanδ
(max) |
Φ4~Φ10 |
0.26 |
0.19 |
0.16 |
0.14 |
0.12 |
0.10 |
0.08 |
0.08 |
0.07 |
Φ12.5~Φ16 |
0.26 |
0.22 |
0.18 |
0.16 |
0.14 |
0.10 |
0.08 |
0.08 |
0.07 |
|
Stability at Low Temperature |
Measurement frequency: 120Hz
Rated voltage (V.DC) |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
80 |
100 |
Impedance ratio
ZT/Z20 (max) |
Z(-25℃)/Z(20℃) |
2 |
2 |
2 |
2 |
2 |
2 |
2 |
2 |
2 |
Z(-40℃)/Z(20℃) |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
Z(-55℃)/Z(20℃) |
4 |
4 |
4 |
3 |
3 |
3 |
3 |
3 |
3 |
|
Load Life
|
After 5000 hours’ (2000 hours’ for Φ4~Φ6.3 and Φ8×6.2, 3000 hours’ for Φ8×10.5~Φ10×13.5 ) application of rated voltage at 105℃, capacitors meet the characteristics requirements listed at right . |
Capacitance Change |
Within ±30% of the initial value |
Tanδ |
200% or less of the initial specified value |
Leakage Current |
|
|
Shelf Life
|
After leaving capacitors under no load at 105℃ for 1000 hours, they meet the specified value for load life characteristics listed above. |
Resistance to Soldering Heat
|
After reflow soldering and restored at room temperature, they meet the characteristics requirements listed at right. |
Capacitance Change |
Within ±10% of the initial value |
Tanδ |
Initial specified value or less |
Leakage Current |
Initial specified value or less |
|
Applicable Standards |
JIS C-5141 and JIS C-5102 |
u Dimensions & Marking
*1 Voltage mark [6V] represents 6.3V for Ф4~Ф10; *2 [L±0.5] is applicable to Φ8×10.5~Ф10; *3 [L±1.0] is applicable to Φ12.5~Ф16.
Re: Date code and series type — 1st digit for Year; 2nd digit for Quarter, 4 quarter codes in one year are 1, 4, 7, O;
3rd character for Series; FZ Series = F.
|
(mm) |
D×L |
Φ4×5.4 |
Φ5×5.4 |
Φ6.3×5.4 |
Φ6.3×7.7 |
Φ8×6.2 |
Φ8×10.5 |
Φ10×10.5 |
Φ10×13.5 |
Φ12.5×13.5 |
Φ12.5×16 |
Φ16×16.5 |
A |
1.8 |
2.1 |
2.4 |
2.4 |
3.3 |
2.9 |
3.2 |
|
4.7 |
4.7 |
5.5 |
B |
4.3 |
5.3 |
6.6 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
12.8 |
12.8 |
16.3 |
C |
4.3 |
5.3 |
6.6 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
12.8 |
12.8 |
16.3 |
E±0.2 |
1.0 |
1.3 |
2.2 |
2.2 |
2.2 |
3.1 |
4.4 |
4.4 |
4.4 |
4.4 |
6.7 |
L |
5.4 |
5.4 |
5.4 |
7.7 |
6.2 |
10.5 |
10.5 |
13.5 |
13.5 |
16.0 |
16.5 |
u Standard size & Maximum permissible ripple current & Impedance
WV
Cap. (μF) |
6.3 |
10 |
16 |
0J |
1A |
1C |
10 |
100 |
|
|
|
|
|
|
4×5.4 |
1.35 |
90 |
15 |
150 |
|
|
|
|
|
|
4×5.4 |
1.35 |
90 |
22 |
220 |
4×5.4 |
1.35 |
90 |
4×5.4 |
1.35 |
90 |
5×5.4
(4x5.4) |
0.70
(1.35)
|
160
(90) |
33 |
330 |
5×5.4
(4×5.4)
|
0.70
(1.35)
|
160
(90) |
5×5.4
(4x5.4)
|
0.70
(1.35)
|
160
(90) |
6.3×5.4
(5×5.4)
|
0.36
(0.70)
|
240
(160) |
47 |
470 |
5×5.4
(4×5.4)
|
0.70
(1.35)
|
160
(90) |
6.3×5.4
(5×5.4)
|
0.36
(0.70)
|
240
(160) |
6.3×5.4
(5×5.4)
|
0.36
(0.70)
|
240
(160) |
56 |
560 |
5×5.4 |
0.70 |
160 |
6.3×5.4 |
0.36 |
240 |
6.3×5.4 |
0.36 |
240 |
68 |
680 |
6.3×5.4
(5×5.4)
|
0.36
(0.70)
|
240
(160) |
6.3×5.4 |
0.36 |
240 |
6.3x7.7
(6.3×5.4)
|
0.26
(0.36)
|
300
(240) |
100 |
101 |
6.3×5.4
(5×5.4)
|
0.36
(0.70)
|
240
(160) |
6.3x7.7
(6.3×5.4)
|
0.26
(0.36)
|
300
(240) |
6.3x7.7
(6.3×5.4)
|
0.26
(0.36)
|
300
(240) |
150 |
151 |
6.3×5.4 |
0.36 |
240 |
6.3×7.7 |
0.26 |
300 |
6.3×7.7 |
0.26 |
300 |
220 |
221 |
6.3x7.7
(6.3×5.4)
(8×6.2)
|
0.26
(0.36)
(0.26)
|
300
(240)
(300) |
6.3×7.7
(8×6.2) |
0.26
(0.26) |
300
(300) |
8×10.5
(6.3×7.7) |
0.16
(0.26) |
600
(300) |
330 |
331 |
6.3×7.7
(8×6.2) |
0.26
(0.26) |
300
(300) |
10×10.5
(8×10.5) |
0.08
(0.16) |
850
(600) |
10×10.5
(8×10.5) |
0.08
(0.16) |
850
(600) |
470 |
471 |
8×10.5 |
0.16 |
600 |
10×10.5
(8×10.5) |
0.08
(0.16) |
850
(600) |
10×10.5
(8x10.5)
|
0.08
(0.16)
|
850
(600) |
680 |
681 |
10×10.5
(8x10.5)
|
0.08
(0.16)
|
850
(600) |
10×10.5 |
0.08 |
850 |
10×13.5
(10×10.5) |
0.07
(0.08) |
950
(850) |
1000 |
102 |
10×10.5
(8x10.5) |
0.08
(0.16) |
850
(600) |
10×13.5
(10×10.5) |
0.07
(0.08) |
950
(850) |
16×16.5
(12.5×16)
(12.5×13.5) |
0.05
(0.055)
(0.06) |
1450
(1200)
(1100) |
1500 |
152 |
10×13.5
(10×10.5) |
0.07
(0.08) |
950
(850) |
12.5×13.5 |
0.06 |
1100 |
16×16.5 |
0.05 |
1450 |
2200 |
222 |
12.5×13.5 |
0.06 |
1100 |
12.5×16 |
0.055 |
1200 |
|
|
|
3300 |
332 |
12.5×16 |
0.055 |
1200 |
16×16.5 |
0.05 |
1450 |
Case Size |
Impedance |
Ripple Current |
4700 |
472 |
16×16.5 |
0.05 |
1450 |
|
|
|
|
|
Maximum Impedance (Ω) at 20℃ 100kHz, Ripple Current (mA rms) at 105℃ 100kHz
u Standard size & Maximum permissible ripple current & Impedance
WV
Cap. (μF) |
25 |
35 |
50 |
1E |
1V |
1H |
4.7 |
4R7 |
|
|
|
4×5.4 |
1.35 |
90 |
5×5.4
(4x5.4) |
1.52
(2.9) |
85
(60) |
10 |
100 |
4×5.4 |
1.35 |
90 |
5×5.4(4x5.4) |
0.70
(1.35) |
160
(90) |
6.3×5.4
(5×5.4) |
0.88
(1.52) |
165
(85) |
15 |
150 |
5×5.4 |
0.70 |
160 |
5×5.4 |
0.70 |
160 |
6.3×5.4 |
0.88 |
165 |
22 |
220 |
6.3×5.4(5x5.4) |
0.36 (0.70) |
240
(160) |
6.3×5.4
(5x5.4) |
0.36
(0.70) |
240
(160) |
6.3×7.7
(6.3x5.4)
(8x6.2) |
0.68
(0.88)
(0.68) |
195
(165)
(195) |
33 |
330 |
6.3×5.4
(5x5.4) |
0.36
(0.70) |
240
(160) |
6.3×5.4
(8x6.2) |
0.36
(0.26) |
240
(300) |
6.3×7.7
(8x6.2) |
0.68
(0.68) |
195
(195) |
47 |
470 |
6.3×7.7
(6.3x5.4)
(8x6.2) |
0.26
(0.36)
(0.26) |
300
(240)
(300) |
6.3×7.7
(6.3x5.4)
(8x6.2) |
0.26
(0.36)
(0.26) |
300
(240)
(300) |
6.3×7.7
(8x6.2) |
0.68
(0.68) |
195
(195) |
56 |
560 |
6.3×7.7
(6.3x5.4)
|
0.26
(0.36)
|
300
(240)
|
6.3×7.7 |
0.26 |
300 |
8×10.5 |
0.34 |
350 |
68 |
680 |
6.3×7.7 |
0.26 |
300 |
6.3x7.7 |
0.26 |
300 |
8×10.5 |
0.34 |
350 |
100 |
101 |
6.3×7.7
(8x6.2) |
0.26
(0.26) |
300
(300) |
8×10.5 |
0.16 |
600 |
10×10.5
(8×10.5) |
0.18
(0.34) |
670
(350) |
150 |
151 |
8x10.5
(6.3×7.7) |
0.16
(0.26) |
600
(300) |
10×10.5
(8x10.5) |
0.08
(0.16) |
850
(600) |
10×10.5 |
0.18 |
670 |
220 |
221 |
8×10.5 |
0.16 |
600 |
10×10.5
(8x10.5) |
0.08
(0.16) |
850
(600) |
10×13.5
(10×10.5) |
0.14
(0.18) |
780
(670) |
330 |
331 |
10×10.5
(8x10.5)
|
0.08
(0.16)
|
850
(600)
|
10×10.5 |
0.08 |
850 |
12.5×13.5 |
0.12 |
900 |
470 |
471 |
10×13.5
(10×10.5) |
0.07
(0.08) |
950
(850) |
12.5×13.5
(10×13.5) |
0.06
(0.07) |
1100
(950) |
16×16.5
(12.5×16) |
0.08
(0.10) |
1250
(1050) |
680 |
681 |
12.5×13.5 |
0.06 |
1100 |
12.5×16 |
0.055 |
1200 |
|
|
|
1000 |
102 |
16×16.5
(12.5×16) |
0.05
(0.055) |
1450
(1200) |
16×16.5 |
0.05 |
1450 |
Case Size |
Impedance |
Ripple Current |
1500 |
152 |
16×16.5 |
0.05 |
1450 |
|
|
|
Maximum Impedance (Ω) at 20℃ 100kHz, Ripple Current (mA rms) at 105℃ 100kHz
u Standard size & Maximum permissible ripple current & Impedance
WV
Cap. (μF) |
63 |
80 |
100 |
1J |
1K |
2A |
3.3 |
3R3 |
|
|
|
5×5.4 |
5.0 |
25 |
|
|
|
4.7 |
4R7 |
5×5.4 |
3.0 |
50 |
6.3×5.4 |
3.0 |
40 |
|
|
|
10 |
100 |
6.3×7.7
(6.3x5.4) |
1.2
(1.5) |
120
(80) |
6.3×7.7
(8x6.2) |
2.4
(2.4) |
60
(60) |
8×10.5 |
1.3 |
130 |
22 |
220 |
8x10.5
(6.3×7.7)
(8x6.2) |
0.65
(1.2)
(1.2)
|
250
(120)
(120) |
8×10.5 |
1.3 |
130 |
10×10.5
(8×10.5) |
0.7
(1.3) |
200
(130) |
33 |
330 |
8×10.5 |
0.65 |
250 |
8×10.5 |
1.3 |
130 |
10×10.5 |
0.7 |
200 |
47 |
470 |
8×10.5 |
0.65 |
250 |
10×10.5 |
0.7 |
200 |
12.5×13.5
(10x13.5) |
0.32
(0.60) |
500
(250) |
68 |
680 |
12.5×13.5
(8x10.5) |
0.16
(0.65) |
800
(250) |
12.5x13.5 |
0.32 |
500 |
12.5×13.5 |
0.32 |
500 |
100 |
101 |
12.5×13.5
(10x10.5) |
0.16
(0.35) |
800
(400) |
12.5x13.5 |
0.32 |
500 |
16×16.5
(12.5×16) |
0.17
(0.26) |
795
(550) |
150 |
151 |
12.5×13.5
(10x13.5) |
0.16
(0.25) |
800
(650) |
12.5x13.5 |
0.32 |
500 |
|
|
|
220 |
221 |
12.5×13.5
(10x13.5) |
0.16
(0.25) |
800
(650) |
12.5x16 |
0.26 |
550 |
Case Size |
Impedance |
Ripple Current |
330 |
331 |
16×16.5 |
0.082 |
1400 |
16×16.5 |
0.17 |
795 |
Maximum Impedance (Ω) at 20℃ 100kHz, Ripple Current (mA rms) at 105℃ 100kHz
u Frequency Correction Factor of Rated Ripple Current
Frequency
Capacitance (μF) |
50Hz |
120Hz |
300Hz |
1kHz |
10kHz~ |
Φ4~Φ10 |
4.7~68 |
0.35 |
0.50 |
0.64 |
0.83 |
1.00 |
100~1500 |
0.40 |
0.55 |
0.70 |
0.85 |
1.00 |
Φ12.5~Φ16 |
~68 |
0.40 |
0.55 |
0.70 |
0.85 |
1.00 |
100~680 |
0.45 |
0.65 |
0.80 |
0.90 |
1.00 |
1000~4700 |
0.65 |
0.85 |
0.95 |
1.00 |
1.00 |